精品橱窗
| 是否进口： | 否 | 加工定制： | 否 |
|---|---|---|---|
| 品牌： | 岩崎IWATSU | 型号： | HV-P60 HV-P30 |
| 测量范围： | DC to 50 MHz | 测量精度： | 2000:1 ±5% |
| 产品用途： | 高压探头 |
日本岩崎IWATSU 高压探头 HV-P60 HV-P30
长沙泰克示波器长沙泰克电源长沙力科示波器长沙力科电源长沙安捷伦示波器长沙力科电源长沙安捷伦示波器长沙安捷伦电源长沙福禄克万用表湖南福禄克万用表 高压探头电流探头 湖南泰克示波器湖南泰克电源 湖南力科示波器 湖南力科电源 湖南安捷伦示波器 湖南力科电源 湖南安捷伦示波器 湖南安捷伦电源 高压探头电流探头
一、产品简介
能够测量60KV/30KV 的高压探头
二、产品特点及详细参数
 | High-voltage waveforms of up to DC 60 kV, pulse 80 kV measured by oscilloscope |
| |
| Wide bandwidth, DC to 50 MHz |
| |
| Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage |
| SpecificationsMaximum input voltageDC 60 kV or AC peak*Single-shot pulse of 80 kV, standard pulse waveBandwidthDC to 50 MHz, within -3 dBRise time7 ns or less (for probes only)Input RC1000 MW ±5% //5 pF ±2 pFAttenuation2000:1 ±5%Cable lengthApprox. 4 mConnectorBNC typeUsed forOscilloscope with input RC: 1 MW, 15 to 50 pFSizeApprox. 88 mm (?) x 338 mm (L)WeightApprox. 3.5 kg (including accessories)AccessoriesMatching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bagOptionsHigh-voltage probe stand SK-301 (produced upon order)The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30).* The P-P voltage drops if the CW is 100 kHz or greater. |
| This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1. |
| Characteristic curve |
|
Maximum Input Voltage and Frequency (Sine Wave) [HV-P60] |
HV-P30
HV-P30 High-voltage probe stand SK-301 (sold separately) |
| High-voltage waveforms of up to DC 30 kV, pulse 40 kV measured by oscilloscope |
| |
| Wide bandwidth, DC to 50 MHz |
| |
| Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage |
| SpecificationsMaximum input voltageDC 30 kV or DC + AC peak*Single-shot pulse of 40 kV, repetitive signalBandwidthDC to 50 MHz, within -3dBRise time7 ns or less (for probes only)Input RC 100 MW ±5% //7 pF or lessAttenuation1000:1 ±5%Cable lengthApprox. 3 mConnectorBNC typeUsed forOscilloscope with input RC: 1 MW, 15 to 50 pFSizeApprox. 66 mm (?) x 315 mm (L)WeightApprox. 3 kg (including accessories)AccessoriesMatching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bagOptionsHigh-voltage probe stand SK-301 (produced upon order)The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30).* The P-P voltage drops if the CW is 100 kHz or greater. |
| This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 30 kV, and the attenuation is 1000:1. |
| Characteristic curve |
|
Maximum Input Voltage and Frequency (Sine Wave) [HV-P30] |
我公司长期提供【供应 维修 日本岩崎IWATSU 高压探头 HV-P60 HV-P30】，如果您对我们的【供应 维修 日本岩崎IWATSU 高压探头 HV-P60 HV-P30】感兴趣，请随时拨打下方的电话，点击留言或QQ与我交谈。联系我时，请说明是在供应商网上看到的，谢谢！
| 联系人 | 吴先生 |
|---|---|
| 电话 | 0731-85260926 |
| 手机 | 𐀘𐀙𐀚𐀛𐀜𐀙𐀝𐀝𐀞𐀟𐀜 |
